Home
Piston Oil Pump Rotor Synchronizer Hub Valve VVT Component Pulley
 
Search Search Sitemap Imprint
Group
About us
Business Units
Technology
  R & D
Human Resources
News
Links
Contact
Login


Publications

For reading these PDF files we suggest Acrobat Reader, which can be downloaded   here free of charge.

For publications later than January 1, 2006 please refer to the   Login-Area.
Abstract Magnetic Properties of Nd-Fe-B HDDR Thin Hot Pressed Magnet
K. Mori, N. Nakayama and K. Morimoto
IEEE Trans. Magn., Vol. 41 [10], 3796-3798, 2005
Abstract Anisotropic HDDR-treated Nd-Fe-B alloy flakes for mechanically oriented composite magnets
K. Morimoto, K. Igarashi, K. Kato, R. Nakayama and M. Yagi
J. Alloys and Compounds, Vol.  393, 311-315, 2005
Abstract Static and Fatigue Properties of High Strength PM-Steels
Lorenz S. Sigl, Patrice Delarbre, Klaus Lipp and Cetin Morris Sonsino
EURO PM 2005 Congress, Prague
Abstract Determination of mechanical properties direct from production components (190KB)
Lorenz S. Sigl, Patrice Delarbre and Ulrike Jehring
Powder Metallurgy, Vol. 48 [1], 13-16, 2005
Abstract P/M GEAR FOR A PASSENGER CAR GEAR BOX (1,21MB)
Günter Rau and Lorenz S. Sigl
International Conference on Gears, Munich, September 2005
Abstract Quantification of Selective Surface Densification in P/M Components (867KB)
Lorenz S. Sigl, Günter Rau and Patrice Delarbre
2005 PM2-Tec Conference, Montréal
Abstract Properties of Surface Densified Gears (607KB)
Lorenz S. Sigl, Günter Rau and Michael Krehl
2005 SAE Conference, Detroit
Abstract Mechanical Properties of Components made from Fe(Cr,Mo) PM Steels (166KB)
Lorenz S. Sigl and Patrice Delarbre
2004 PM2004 World Conference, Vienna
Abstract Evolution of Gear Quality in Helical PM Gears During Processing (189 KB)
Lorenz S. Sigl, Günter Rau, Pierluigi Zingale, Sven Bengtsson and Didier Caudebec
2004 PM2004 World Conference, Vienna
Abstract Improvements in Magnetic Properties of Commercial HDDR-Processed Nd-Fe-B Magnet Materials
K. Morimoto
Technology Contribution Award, Japanese, 2004
Abstract Magnetic properties of anisotropic Nd-Fe-B HDDR powders prepared from strip cast alloys
K. Morimoto, K. Kato, K. Igarashi and R. Nakayama
J. Alloys and Compounds, Vol. 366, 274-278, 2004
Abstract A Comparison of Mechanical Properties Obtained from Conventional Strength Specimens and from AS-Sintered Components (327KB)
Lorenz S. Sigl, Patrice Delarbre and Ulrike Jehring
2004 PM2-Tec Conference, Chicago
Abstract Comparison of The Performance and Cost Properties of Automatic Transmission and Four Wheel Drive Transfer Case Planetary Carriers (957 KB)
Lorenz S. Sigl, Michael Krehl, Rocco Petrilli, Robert Gawronski and Ronald Cornacchia
2004 SAE Conference, Detroit
Abstract On Line Measuring in Complex PM Parts By Conoscopic Holography (439KB)
Nestor Martinez, Cesar Fraga, Ignacio Alvarez and Jorge Marina
Euro PM 2003 Conference, Valencia
Abstract Processing and Performance of PM Synchronizer Rings With Friction Linings (625 KB)
Lorenz S. Sigl, Günter Rau, Bernd-Robert Höhn and Hermann Pflaum
Euro PM 2003 Conference, Valencia
Abstract Preparation of fully dense Nd-Fe-B magnets using semi-processed HDDR powders
K. Morimoto, E. Niizuma, K. Igarashi, K. Mori, M. Watanabe and R. Nakayama
J. Magn. and Magn. Materials, Vol. 265, 345-351, 2003
Abstract Influences of original alloy microstructure or magnetic properties of isotropic HDDR-treated Nd-Fe-B powder
K. Morimoto, E. Niizuma, R. Nakayama and K. Igarashi
J. Magn. and Magn. Materials, Vol. 263, 201-207, 2003
Abstract Impact of Oxygen on The Microstructure and Fracture Morphology of Fe(Cr,Mo)-PM Steels (1,47MB)
Lorenz S. Sigl and Patrice Delarbre
2003 PM2-Tec Conference, Las Vegas
Abstract Highly Loaded P/M Gears Produced By Selective Surface Densification (708KB)
Günter Rau, Lorenz S. Sigl and Michael Krehl
2003 SAE Conference, Detroit
Abstract Recent Developments in P/M Variable-Valve-Timing Systems for Automobiles (439KB)
Heinrich Wiedemann, Patrice Delarbre, Bernd Engelmann, Michael Krehl and Lorenz S. Sigl
2002 PM2-Tec Conference, Orlando
Abstract Application of P/M Aluminum Parts – Materials and Processing Schemes (469KB)
Patrice Delarbre and Michael Krehl
2000 Int. Conf. On P/M Aluminum and Light Alloys for Automotive Applications, Detroit
Abstract Application of PM Materials in Synchronizer Rings (1,79MB)
Michael Krehl and Günter Rau
Euro PM 2000, München
Abstract Sintered Steel Parts for Automobile Weight Reduction (1,11MB)
Michael Krehl and Günter Rau
forum ThyssenKrupp, 1999
Abstract PM Synchronizer Rings Ready for Installation, Completed With PM Friction Layers (2,29MB)
Michael Krehl and Günter Rau
Euro PM 1997, München
  Copyright © 2010 by PMG Holding S.A. Last update: 31/07/2010