September 30th, 2009
Realignment of PMG Group
We would like to inform you about the change in the PMG Group organization.
On December 1st, 2009, the shareholder structure of PMG S.A. will be altered...
more
July 2009
PMG Indiana has been awarded a Design Excellence Award by MPIF for 2009
Chad Brummett, manufacturing engineering manager, and Scott Davis, director of applications, North American powertrain, PMG Indiana Corporation, Columbus, Indiana, accepted an Award of Distinction for the Automotive...
more
July 15, 2008
Opening ceremony for new production line
With an opening ceremony in its new production hall in Reutte/Austria, PMG Asturias Powder Metal S.A.U. has officially commissioned its new production line for planetary carriers. The fully automated production line will generate annual sales of approximately 5.6 million euros.
more
July 4, 2008
Changes in the Executive Board
Mr. Masafumi Koga, after his turn as President of the PMG Group, retired effective June 12th. Dr. Michael Krehl, so far Executive Vice President of the PMG Group, and Mr. Takeshi Itaba, so far Executive Officer and Vice President at Mitsubishi Materials Corporation, were named co-Presidents of the PMG Group.
more
July 4, 2008
Awards for PMG Japan and PMG Füssen in Washington
Two awards for PMG Group at the 2008 Powder Metallurgy Design Excellence Awards Competition in Washington!
more
May 05, 2008
PMG Group builds new plant in China
Shanghai Fengpu Industrial Park, China, 24 April 2008 – PMG Group builds a new plant in Shanghai to fulfill huge customer demand for locally manufactured PM products. The company foundation took place on April 23, 2008 at the Shanghai Fengpu Industrial Park in the presence of the Provincial Minister. Mass production is scheduled to start by years end.
more
September 10, 2007
PMG wins Design Excellence Award
Outstanding powder metallurgy (PM) parts won awards in the 2007 Powder Metallurgy Design Excellence Awards competition sponsored by the Metal Powder industries Federation (MPIF). The winning parts are examples of advances in conventional press & sinter PM processing, metal injection molding (MIM), and hot isostatic pressing (HIP).
more
August 31, 2007
Soft Magnetic PM
PMG exhibits its state of the art soft magnetic composite PM technology at the Soft Magnetic Materials Conference in September 2007 in Cardiff.
Please see details Technology
more
August 01, 2007
Changes in the Executive Board of PMG Holding S.A.
On August 1, Peter Müller will begin work at the PMG Group as new Executive Director of PMG Holding S.A. responsible for Finance, Controlling, and Information Technology.
more
June 09, 2006
PMG Füssen GmbH appointed New Managing Director
On June 1, 2006, Dr. Alois Huber was appointed Managing Director of the automotive supplier PMG Füssen GmbH, part of the globally active PMG Group...
more
April 2006
MPIF 2006 Powder Metallurgy Design Excellence Award for PMG Ohio Corporation
In April 2006 the winners in the 2006 Powder Metallurgy Excellence Awards competition were recognized for outstanding new components made by the powder metallurgy (PM) process...
more
2005
JPMA 2005 New Materials Award for Powder Forged Valve Sheets for Gas Engine with high Adhesive Wear Resistance for Mitsubishi Materials Corporation
Developed powder forged valve sheets, which are composed of Fe-C-Cr-Mo-Co-Ni-Nb-CaF2, have been applied to general gas engine and truck gas engine...
more
2005
JPMA 2005 New Design Award for Development of P/M Parts for PCS (Pre-Crash Safety) for Mitsubishi Materials Corporation
These parts are used for the seat belt volume removing device corresponding to PCS (Pre-Crash Safety) system of the car, and it is composed of five parts...
more
2005
JPMA 2005 New Design Award for Sintered Stainless Pulley for Outboard Engine for Mitsubishi Materials Corporation
This sintered stainless pulley is used for high output 4-stroke outboard engine. Recently, outboard engine is required for good fuel consumption and clean emission, so 4-stroke engine has been replacing 2-stroke engine...
more
2005
JPMA 2005 New Design Award for Development of Sintered Piston Parts for Swing Compressor for Mitsubishi Materials Corporation
Sintered piston part was developed for swing compressor. Conventionally, piston part had been produced by the cast method to secure permanence of lever and air lock...
more
August 09 , 2005
Plansee and Mitsubishi Materials have signed the Joint Venture Agreement
Establishing a Global PM-Group
On August 9th, 2005, PLANSEE Holding AG (“PLANSEE”) and Mitsubishi Materials Corporation (“MMC”) have signed the joint venture agreement to merge their relevant business activities in the field of powder metallurgical (PM) products under a holding company based in Luxembourg. PLANSEE and MMC will hold each a 50 percent equity share in this joint venture...
more
June 22 , 2005
MPIF 2005 Overseas Grand Prize for Sinterstahl Füssen GmbH
On June 22, 2005, at the MPIF Congress in Montréal, Canada, Sinterstahl Füssen GmbH was awarded the "OVERSEAS GRAND PRIZE" for an innovative sprocket application in the international P/M design competition...
more
January, 2005
SINTERSTAHL Increases its Market Presence in North America
The Sinterstahl group acquired the Dayton, Ohio powdered metal operation of Federal Mogul. An asset purchase agreement was signed on November 8th, 2004. This agreement became effective with the approval of the U.S. Bankruptcy Court in January, 2005...
more
July 19, 2004
MPIF 2004 Overseas Award of Distinction for Sinterstahl Polmetasa S.A.
Should vibrations in cars be dampened by “sporty” shock absorbers or would you prefer a more comfortable ride – at the expense of safe driving? Forget about questions like these with new electronic damping systems. The key feature in these systems are new continuously variable shock absorbers, which change from “soft” to “hard” at lightning speed....
more
Juli 5, 2004
SINTERSTAHL doubles size of production plant in Asturias, Spain
Eight years after building a new Sinterstahl factory for the manufacturing of transmission parts in Miéres, Asturias, Spain, the first expansion of this facility was inaugurated on July 5th, 2004, with the Spanish Secretary of Industry, José Montilla Aguilera, and the President of the Province of Asturias, Vicente Alvarez Areces, and other guests of honor in attendance...
more
